Pyroelectric and RP Heads
Ophir
For Measuring Repetitive Energy Measurements - Ophir Optronics PE and RP Series of pyroelectric detectors combine high accuracy, high damage threshold and high repetition rate operation in a single head.
you can measure both long pulses up to 10mS and have a high repetition rate up to 4KHz in the same detector head. The pulsed detectors also provide sensitivity down to 100pJ .
- Main Features:
- Built-in wavelength correction
- Spectral range from 0.15 to 20μm
- Pulse rate to 4000Hz (PE10 series)
- Energy measurement to 10pJ (PD10-pJ)
- Diffuser models for high energy YAG / Holmuim /Erbium lasers
- Versatility: Measurements of very long and very short pulses
- Measurement from nW to kW, μJ to 2000 μJ with appropriate heads
Energy Measurements -Pyroelectric Head 100mm
Ophir
Energy Measurements OPHIR PE10BB-DIF -Large aperture pyroelectric head with removable diffuser for high damage threshold.
- Energy measurement range from 1.2mJ à 40J per pulse
- Wavelength range from 190nm up to 20μm (190-2.5μm with diffuser)
This new head is ideally suited to test your pulse sources.
OPHIR Catalog
Ophir
The true Measure of Laser performance - Ophir manufactures the most complete line of laser measurement instruments available, both off the shelf and OEM. Ophir instruments measure laser power, laser energy, laser beam profile and spectrum.
Only Ophir power/energy meters have complete plug and play capability where one display is compatible with all heads from nW and nJ to KW and hundreds of Joules. All Ophir instruments have NIST traceable calibration.
Please contact us for your copy of the Ophir Catalog!
Please contact us for your copy of the Ophir Catalog!
PHOTONICS 
